SAR800 – SAR1250

The coil unwinder SAR was developed as a cable supplier which delivers material from big coils without pulling force. Due to the contact-free-processing sag control, the isolation hose of the material cannot be damaged.

The material coil is lifted up by a pneumatic lift table (optionally) and positioned by the operator onto the two drive shafts. One of the drive shafts can be moved motorized (optional) to lift down the coil slowly into the unwinder unit. For fixation, the tapered brackets are pushed into the center holes. This enables the user to process also damaged wood and plastic coils.

Optionally, the unwinding speed can be controlled and optimized for the production flow by the sag control DHS1000 D or by the cable accumulator system KSP/LSP.

SAR800 – SAR1250

INformações do produto

SAR800
Drive motor: three-phase motor
Speed: max. 2.0 m/s
Length: 1800 mm
Width: 1760 mm
Height: 1320 mm
Coil diameter / min: 400 mm
Coil diameter / max: 800 mm
Coil width / max: 510 mm
Coil weight / max: 500 kg
Compressed air supply with optional lifting device: optional 10 bar
Power supply: 3 x 400 V, 50-60 Hz, 16 A
Adjustable axis: OPTION
Weight: 270 kg

SAR1000
Drive motor: three-phase motor
Speed: max. 2.0 m/s
Length: 2000 mm
Width: 1920 mm
Height: 1440 mm
Coil diameter / min: 500 mm
Coil diameter / max: 1000 mm
Coil width / max: 710 mm
Coil weight / max: 500 kg
Compressed air supply with optional lifting device: optional 10 bar
Power supply: 3 x 400 V, 50-60 Hz, 16 A
Adjustable axis: OPTION
Weight: 320kg

SAR1000
Drive motor: three-phase motor
Speed: max. 2.0 m/s
Length: 2300 mm
Width: 1980 mm
Height: 1510 mm
Coil diameter / min: 600 mm
Coil diameter / max: 1250 mm
Coil width / max: 890 mm
Coil weight / max: 500 kg
Compressed air supply with optional lifting device: optional 10 bar
Power supply: 3 x 400 V, 50-60 Hz, 16 A
Adjustable axis: OPTION
Weight: 410kg